Dongguan SANNI Electronics Technology Co., Ltd.
Dongguan SANNI Electronics Technology Co., Ltd. have more than 10year of experiences in design and manufacture of potentiometer, encoder, switches and other electronics components. Factory covers 1
Add to Cart
Sliding potentiometer (pot) uses a resistance element and sliding contacts to form an adjustable voltage divider. If only two terminals, one end of the element and adjustable contacts are used, it acts as a variable resistor or rheostat.
Features of Slide Potentiometer
Product Characteristics
| 1.Electrical Characteristics | |
| Total resistance | 5KΩ-500KΩ |
| Total resistance tolerance | ±10% or ±20% |
| Rated Power | 0.05W for linear taper, 0.025W for audio taper |
| Dielctrical strength | 250V DC for １minute |
| Max. operation voltage | 50V AC, 20V DC |
| Residual resistance | 50Ω Max |
| Insulation resistance | 100MΩ min．(DC 500V) |
| Noise | 47 mV max |
| 2.Mechanical Characteristics | |
| Lever travel | 100±1mm |
| 6Kgf.cm Min | 2(2xL/25)mm P-P Max. |
| Lever stop strength | 6Kgf.cm Min |
| Slide trust of the Lever | 5Kgf 10s Min |
| Operating force | 5-35gf.cm |
| Life Cycle | 30,000 cycles |
| 3.Environmental Performance | |
| Operating temperature range | -10oC to +70oC |
| Storage temperature range | -30oC to +70oC |
| 4.Welding Performance | |
| Reference for hand soldering | 235℃ 5sec. |
| Motor Drive Characteristics | |
| Rated voltage | 5V DC |
| Actuator move speed | 20mm/0.1 sec. Min. |
| Operating voltage | 4~6V DC |
| Max current | 300-600mA |
Our Services
FAQ
1.Q: Can I get sample from you?
A: Yes, we can provide the free samples for your testing, please contact us for free and tell us which product you need.
2.Q: Do you accept customization?
A: Yes, customization is acceptable, please contact our sales staffs for consult.
3.Q: Can you provide help for technical issues?
A: Yes, we have more than 10 years of research and development in the electronic potentiometer industry. If you need technical help in the purchase process, please feel free to contact us.