Dongguan SANNI Electronics Technology Co., Ltd.
Dongguan SANNI Electronics Technology Co., Ltd. have more than 10year of experiences in design and manufacture of potentiometer, encoder, switches and other electronics components. Factory covers 1
Add to Cart
Slide potentiometer (pot) uses a resistance element and slide contacts to form an adjustable voltage divider. If only two terminals, one end of the element and adjustable contacts are used, it acts as a variable resistor or rheostat.
Features of Slide Potentiometer
Product Characteristics
| 1.Electrical Characteristics | |
| Total resistance | 5KΩ-500KΩ |
| Total resistance tolerance | ±10% or ±20% |
| Rated Power | 0.05W for linear taper, 0.025W for audio taper |
| Dielctrical strength | 250V DC for １minute |
| Max. operation voltage | 50V AC, 20V DC |
| Residual resistance | 50Ω Max |
| Insulation resistance | 100MΩ min．(DC 500V) |
| Noise | 47 mV max |
| 2.Mechanical Characteristics | |
| Lever travel | 100±1mm |
| 6Kgf.cm Min | 2(2xL/25)mm P-P Max. |
| Lever stop strength | 6Kgf.cm Min |
| Slide trust of the Lever | 5Kgf 10s Min |
| Operating force | 5-35gf.cm |
| Life Cycle | 30,000 cycles |
| 3.Environmental Performance | |
| Operating temperature range | -10oC to +70oC |
| Storage temperature range | -30oC to +70oC |
| 4.Welding Performance | |
| Reference for hand soldering | 235℃ 5sec. |
| Motor Drive Characteristics | |
| Rated voltage | 5V DC |
| Actuator move speed | 20mm/0.1 sec. Min. |
| Operating voltage | 4~6V DC |
| Max current | 300-600mA |
Our Advantage